講演抄録/キーワード |
講演名 |
2008-04-22 09:40
ミリ波帯結合線路装荷反射型2周波出力VCO ○水谷浩之・西田和広・津留正臣・川上憲司・檜枝護重(三菱電機) SCE2008-3 MW2008-3 エレソ技報アーカイブへのリンク:SCE2008-3 MW2008-3 |
抄録 |
(和) |
ミリ波帯位相同期発振器の出力を逓倍する逓倍器を削減するため,従来の2次高調波出力VCOの構成をもとに,基本波出力のために結合線路を新たに装荷した2周波出力VCOの構成を提案する.本構成では,結合線路の結合度が設計パラメータとなり,基本波や2倍波の出力電力を最適化可能である.GaAs HBTプロセスを用いて基本波周波数がKa帯の2周波出力VCO MMICを試作した結果,同調電圧が0 V~5 Vの範囲において,基本波出力電力+1.6~+2.1 dBm,2倍波出力電力-9.0~-7.5 dBm,位相雑音-107dBc/Hz(基本波周波数,1MHz離調)が得られ,本構成の有用性を確認した. |
(英) |
In order to eliminate a multiplier that doubles the output frequency of a millimeter-wave phase locked oscillator, we study on the dual-frequency VCO that can output the fundamental and the second harmonic signal from different ports. In this paper, we propose a configuration that is based on that of the conventional second harmonic VCO, and a coupled line is additionally connected to output the fundamental signal. Since a coupling factor of the coupled line is the design parameter, outputs of the fundamental and the second harmonic signal can be optimized. We fabricated a dual-frequency VCO MMIC using GaAs HBT process that oscillates in Ka-band, and the fundamental output of +1.6 to +2.1 dBm, the second harmonic output of -9.0 to -7.5 dBm, and the phase noise of -107dBc/Hz at 1 MHz offset at the fundamental frequency are obtained. The measurement results show the usefulness of the proposed configuration. |
キーワード |
(和) |
ミリ波 / VCO / 2周波出力 / / / / / |
(英) |
Millimeter-wave / VCO / Dual-Frequency / / / / / |
文献情報 |
信学技報, vol. 108, no. 13, MW2008-3, pp. 13-18, 2008年4月. |
資料番号 |
MW2008-3 |
発行日 |
2008-04-15 (SCE, MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SCE2008-3 MW2008-3 エレソ技報アーカイブへのリンク:SCE2008-3 MW2008-3 |