講演抄録/キーワード |
講演名 |
2008-04-18 13:35
ハンマリング加振機構による電気接点の劣化現象 ~ 加振機構のモデリング ~ ○和田真一・越田圭治・峯岸寛人・天尾裕士・園田健人・菊地光男・久保田洋彰(TMCシステム)・澤 孝一郎(慶大) EMD2008-1 エレソ技報アーカイブへのリンク:EMD2008-1 |
抄録 |
(和) |
電気接点に実用的振動を与えうるハンマリング加振機構を開発し,微小振動が接触抵抗に与える影響を考察できる可能性を検討した.本加振機構の数学的モデル化を実施し,PCによりシミュレーションを行なった.このモデルを用いて変位・加速度・力学的エネルギーなどの基本的な力学量に関する考察を行なった.一方,有限要素法(ジオメトリ要素法)により,加振動作をシミュレートした.基板を固定している固定端近傍の挙動や変位・加速度の絶対値において差異はみられたものの,概形において一致をみた. |
(英) |
We have developed the mechanism which gives vibration to electrical contacts by hammering oscillation and studied the influences of a micro-oscillating on the contacts. By means of a mathematical modeling of the oscillating mechanism, the dyanamical characteristics of the mechanism was simulated with a personal computer (PC). By making use of this model, it was studied to estimate approximately a fundamental mechanical quantities such as a displacement, an acceleration, and a mechanical energy. On the other hand, by FEM, such as a geometry element method, the hammring oscillating motion was simulated. The simulated data was in agreement with the measured ones to the degree with the exeption of a motion near the fixed points on the board and of the absolute values of a displacement and an acceleration. |
キーワード |
(和) |
電気接点 / 加振機構 / 数学的モデル / シミュレーション / 有限要素法 / / / |
(英) |
electrical contact / oscillating mechanism / mathematical model / simulation / finite element method (FEM) / / / |
文献情報 |
信学技報, vol. 108, no. 10, EMD2008-1, pp. 1-6, 2008年4月. |
資料番号 |
EMD2008-1 |
発行日 |
2008-04-11 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2008-1 エレソ技報アーカイブへのリンク:EMD2008-1 |