講演抄録/キーワード |
講演名 |
2008-03-07 14:05
過渡電流スイッチ回路を用いた電気接点開離時ノイズの抑制 ○本間 亘・若月 昇・及川雅弘(石巻専修大) EMCJ2007-125 |
抄録 |
(和) |
開閉電気接点は機能・形体が単純であり、回路の開閉に広く用いられている。しかし、接点開離時に様々な要因でノイズが発生する。大電力回路でのアーク放電、誘導負荷回路でのサージ電圧等である。
今報告では、汎用電磁リレーを対象に、ノイズの発生原因を解析してスイッチングノイズの低減を目指す。我々は、開離時接点電圧の上昇と回路の電流変化を抑制する過渡電流スイッチ回路を提案してきた。この回路を用いた場合の50V/ 8A、84mHの誘導負荷回路の開離時アーク放電とサージ電圧の抑制について報告する。 |
(英) |
The make and break operation electric contacts has a simple function and structure. It is used widely for the make and break operations of an electric circuit. However, noise is generated at the breaking operation by various factors. For example, there is arc discharge in the high-power circuit and surge voltage in the inductive load circuit.
In this paper, the cause of noise generation is analyzed against the decrease of switching noise, and an electromagnetic relay is used for experimental target. The authors propose a transient current switch circuit that suppresses the rise of contact voltage and the load current change at the breaking operation. This paper reports the suppression of arc discharge and surge voltage at the breaking operation, in the case of an inductive load circuit of 50 V / 8 A, 84 mH using a transient current switch circuit. |
キーワード |
(和) |
アーク放電 / サージ電圧 / 過渡電流スイッチ回路 / / / / / |
(英) |
arc discharge / surge voltage / transient current switch circuit / / / / / |
文献情報 |
信学技報, vol. 107, no. 533, EMCJ2007-125, pp. 49-52, 2008年3月. |
資料番号 |
EMCJ2007-125 |
発行日 |
2008-02-29 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2007-125 |