講演抄録/キーワード |
講演名 |
2008-02-15 14:15
微摺動摩耗による接触抵抗変化の機構に関する研究 ○佐藤尚幸・齋藤 寧・玉井輝雄・飯田和生(三重大)・伊藤哲也・服部康弘(オートネットワーク技研) R2007-64 EMD2007-119 エレソ技報アーカイブへのリンク:EMD2007-119 |
抄録 |
(和) |
近年、車載用コネクタの小型化に伴い接触荷重が低下し、接続の信頼性を確保する上で、微摺動摩耗現象が重要な問題となっている。本研究では、車載用コネクタに用いられているスズめっき接点における同現象の機構を解明することを目的としている。接触抵抗変化が、摩耗粉の発生、酸化、堆積、排除により引き起こされ、これら一連の変化はめっきのスズ、スズの摩耗粉、その酸化物、めっきと母材間の金属間化合物、母材の銅合金の硬度の違いによるものであるとの仮説を立て、それについて検証した。 |
(英) |
Recently, according to downsizing of connectors which applied to automobile, reductions of contact load in connectors are required. For ensuring connecting reliability, it is serious problems that occurrence of fretting corrosion, which is a typical problem of low-load electrical contacts happens. In this study, behavior of fretting corrosion of thin plated contacts which is widely used in automotive connectors was clarified in more precise. Fretting corrosion is assumed and examined. Namely, change of contact resistance in fretting corrosion should be arisen from generation, oxidization, accumulation and removal of fretting debris, and such successive change are due to difference of hardness of plated tin, tin fretting debris, the oxide, intermetallic compound between plated and base metal and copper alloy of base metal. |
キーワード |
(和) |
微摺動摩耗 / スズめっき / 硬度 / / / / / |
(英) |
Fretting corrosion / Tin plated / Hardness / / / / / |
文献情報 |
信学技報, vol. 107, no. 485, EMD2007-119, pp. 31-36, 2008年2月. |
資料番号 |
EMD2007-119 |
発行日 |
2008-02-08 (R, EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
R2007-64 EMD2007-119 エレソ技報アーカイブへのリンク:EMD2007-119 |
|