講演抄録/キーワード |
講演名 |
2008-01-18 13:25
伝送線路測定による材料定数の抽出と電磁界解析への適用 ○鳥屋尾 博・若林良昌(NEC) CPM2007-142 ICD2007-153 エレソ技報アーカイブへのリンク:CPM2007-142 ICD2007-153 |
抄録 |
(和) |
GHz帯の高周波領域では誘電材料等の材料定数が電磁界解析の精度を左右する。本報告ではプリント配線板上のマイクロストリップ配線の伝送特性から基板表面上のソルダーレジストの比誘電率を求める近似式を提案し、抽出した比誘電率を電磁界解析に適用することで解析精度が向上することを示す。またシングルエンド配線測定から抽出した比誘電率を、電界分布の異なる差動配線の電磁界解析モデルに適用した場合も解析結果が実測と一致することを示した。この結果から18GHz程度の周波数領域では、材料定数の異方性が伝送特性に与える影響は小さいと考えられる。 |
(英) |
The material constants of dielectric materials such as solder resist have a large influence on the accuracy of the electromagnetic field analysis in the high frequency. In this report, we propose an approximation formula of effective dielectric constant of micro strip line (MSL) covered with solder resist, and an extraction method of solder resist dielectric constant from MSL measurement data. We have confirmed the accuracy of extracted material constants by comparing the measurement data and the data simulated with these constants. In addition, we show that the influence of material constant anisotropy on MSL transmission property is relatively small up to the frequency of about 18GHz. |
キーワード |
(和) |
プリント配線板 / 材料定数 / 伝送線路 / / / / / |
(英) |
printed circuit board / material constant / transmission line / / / / / |
文献情報 |
信学技報, vol. 107, no. 425, CPM2007-142, pp. 83-86, 2008年1月. |
資料番号 |
CPM2007-142 |
発行日 |
2008-01-10 (CPM, ICD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
CPM2007-142 ICD2007-153 エレソ技報アーカイブへのリンク:CPM2007-142 ICD2007-153 |