講演抄録/キーワード |
講演名 |
2007-05-22 10:00
第2高調波の効率的な生成に適したFETの入力および出力回路 ○岸田武紘・佐薙 稔(岡山大)・高橋伸悟(三菱電機)・藤森和博・野木茂次(岡山大) MW2007-21 エレソ技報アーカイブへのリンク:MW2007-21 |
抄録 |
(和) |
FETを用いた第2高調波発生において、ゲート端子に接続する入力回路とドレーン端子に接続する出力回路の最適構成を検討した。周波数2逓倍器の回路シミュレーションと実験により、入力回路については基本波周波数ではゲート端子と共役整合させ、第2高調波周波数では適切なリアクタンス値を持たせ、出力回路には基本波周波数において逆C級動作をさせるリアクタンス負荷を含むことで高い逓倍効率が得られることを示した。最適化された入力回路および出力回路をシングルエンド型の
第2高調波出力発振器に適応し、基本波発振周波数が4GHzと6GHzの両方の場合において、20mW以上の出力電力と20%以上のドレーン効率を得た。 |
(英) |
In the second harmonic generation with FETs,
optimum configuration of input circuits connected to the gate terminal
and output circuits connected to the drain terminal have been investigated.
Circuit simulations and experiments of frequency doublers revealed that
the input circuits which are conjugately matched with the gate terminal for the fundamental component and has an appropriate reactance at the second harmonic frequency, and the output circuit with the fundamental eactive termination for the inverse class-C operation are required for efficient frequency doubling. By applying the optimum input and output circuits to the single ended second harmonic oscillators, output powers of higher than 20mW and drain efficiencies of higher than 20% were obtained in both cases of the fundamental oscillation frequency of 4GHz and 6GHz. |
キーワード |
(和) |
マイクロ波 / 周波数逓倍器 / 高調波出力発振器 / 逆C級動作 / / / / |
(英) |
microwave / frequency multiplier / harmonic oscillator / inverse class-C operation / / / / |
文献情報 |
信学技報, vol. 107, no. 49, MW2007-21, pp. 49-54, 2007年5月. |
資料番号 |
MW2007-21 |
発行日 |
2007-05-14 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2007-21 エレソ技報アーカイブへのリンク:MW2007-21 |