講演抄録/キーワード |
講演名 |
2006-10-27 11:10
H面導波管8ポートハイブリッドの設計とその結合度可変方向性結合器への応用 戸田克則・○太田 勲(兵庫県立大)・岸原充佳(岡山県立大) EMCJ2006-66 MW2006-122 エレソ技報アーカイブへのリンク:MW2006-122 |
抄録 |
(和) |
本論文は,H面十字形3dBハイブリッドを基本構成要素とする8ポートハイブリッドを提案し,いくつかの構成法とその最適設計結果について記述している.本回路は,極めて簡潔な小型形状で,完全な平面構造であるという利点に加えて,回路不連続部(導体壁)が上・下底を除いて全て電界ベクトルと平行であるため高耐電力特性という特徴も有している.したがって,モノパルスレーダシステムのコンパレート回路などの他に,線形加速器などの超高電力マイクロ波システムの4方向電力合成/分配回路としての応用も可能である.
次に,上記で得た8ポートハイブリッドの互いに分離している4個のポートを,2個ずつセットにして各セットを同位相(又は逆位相)の完全反射回路で終端し,セット間の位相差を調整することにより,残りの4ポートで結合度可変方向性結合器を構成する方法について論じている.また,このことを利用してH面導波管マジックTの構成法を提案し,広帯域特性の実現が可能なことを示した.なお,上記の設計結果や動作特性はシミュレーションと試作実験によってその妥当性を確認している. |
(英) |
This paper suggests an eight-port hybrid consisting of four cruciform H-plane 3-dB hybrids connected with each other and presents some circuit configurations and their optimization results. In addition to the compact structure and fully planar structure, the present eight-port hybrids are marked by very high power handling capability. Therefore, this circuit would be useful for not only a comparator in a monopulse radar system but also four-way power combining / dividing in a super-high power microwave system such as a linear accelerator.
Next, a directional coupler with variable coupling factor is proposed using the above eight-port hybrid. The coupling factor can be controlled from 0 to ∞ dB by appropriately adjusting the phase relation of reflectors connected at four ports isolated from one another. Moreover, a broadband H-plane waveguide magic T is demonstrated using the working principle. |
キーワード |
(和) |
多分岐回路 / 比較回路 / ハイブリッド / 方向性結合器 / H面導波管 / マイクロ波受動回路素子 / / |
(英) |
Multi-port circuit / ,Comparator / hybrid / Directional coupler / H-plane waveguide / Microwave passive component / / |
文献情報 |
信学技報, vol. 106, no. 323, MW2006-122, pp. 87-91, 2006年10月. |
資料番号 |
MW2006-122 |
発行日 |
2006-10-19 (EMCJ, MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2006-66 MW2006-122 エレソ技報アーカイブへのリンク:MW2006-122 |