講演抄録/キーワード |
講演名 |
2006-08-24 13:35
近傍界測定による0.64THz帯サブミリ波アンテナの性能検証法 ○西堀俊幸・水越和夫(JAXA)・真鍋武嗣(阪府大/JAXA)・大嶺裕幸・滝沢直樹(三菱電機) AP2006-64 |
抄録 |
(和) |
国際宇宙ステーション日本実験棟搭載超伝導サブミリ波リム放射サウンダ(JEM/SMILES)用アンテナ系の近傍界測定システムを開発したので報告する.
アンテナ系エンジニアリングフライトモデル(EFM)単体の遠方界放射特性を評価するために,プロファイル付き円形コルゲート導波管を1次放射器とするSMILESアンテナ系の特徴を利用し,HE11モードのビームプロファイルを波長に依存しないイメージホーンの設計手法で発生させる模擬光学系と模擬光学系用コルゲートホーンを設計し,開発したサブミリ波近傍界測定システムでその性能を評価した.
模擬光学系のコルゲートホーンでは一般的な設計方法に固執せず,製造上の制約を考慮したコルゲーションの溝深さと幅の関係を設計条件に取り入れた.
性能評価の結果,模擬光学系用コルゲートホーンは理論値に近い遠方界放射特性が得られ,これにより模擬光学系は円形コルゲート導波管のビームプロファイルと一致する特性が得られた. |
(英) |
This paper describes a perfomance verification technique of the offset Cassegrain antenna of the Superconducting Submillimeter-Wave Limb-Emission Sounder (JEM/SMILES) for the Japanese Experiment Module on the International Space Station, and the detail of the submillimeter-wave near-field antenna measurement system was presented.
An optics simulator with a corrugated feed horn for the antenna measurements which simulated beam profile of HE11 fandamental mode of corrugated circular waveguide by the design technique of an image horn was manufactured.
In the design of the corrugated feed horn of the optics simulator, the relation between the depth and the width of the corrugation was taken into account considering restrictions in the manufacturing process.
As a result of the performance evaluation, the measured far-field characteristics of the corrugated feed horn was found to be in good agreement with theoretically calculations, and it was found that the beam profile of the corrugated circular waveguide could be simulated by this optics simulator. |
キーワード |
(和) |
コルゲートホーン / ベクターネットワークアナライザ / 近傍界測定 / 平面スキャナ / サブミリ波 / / / |
(英) |
Corruated feed horn / Vector network analyzer / Near-field measurement / Planar scanner / Submillimeter-wave / / / |
文献情報 |
信学技報, vol. 106, no. 209, AP2006-64, pp. 39-44, 2006年8月. |
資料番号 |
AP2006-64 |
発行日 |
2006-08-17 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2006-64 |