講演抄録/キーワード |
講演名 |
2006-04-20 15:15
製造ばらつきを考慮したセンサネットワークノード消費電力モデルの提案と評価 ○芳野宏徳・竹内 隆・一圓真澄・松田隆志(神戸大)・三上真司(金沢大)・川口 博・太田 能・吉本雅彦(神戸大) NS2006-6 |
抄録 |
(和) |
ワイヤレスセンサネットワークでは、ライフタイムの拡大が最も重要な課題である。ネットワークのライフタイムを拡大するためには、システム全体の最適設計をしなければならない。設計したシステムを評価するために、シミュレータに実装可能なセンサノードの消費電力モデルが求められていた。本研究では、センサノードの消費電力モデルに、現在CMOS回路で問題となっている閾値電圧の製造ばらつきを導入した。従来モデルと比較すると、閾値電圧ばらつきを考慮した場合、消費電力がばらつき、平均消費電力が増大することが判明した。さらに、ネットワークシミュレータに実装し、ネットワークレベルで比較した。その結果、従来のモデルはばらつきのあるモデルよりもシステムライフタイムを長く見積もる傾向にあることがわかった。 |
(英) |
We introduced manufacturing variation into a power model for a wireless sensor network node. Network protocols for wireless sensor networks such as media access control and routing should be evaluated in terms of life time as a whole system. In fact, there exists variation in power node-by-node due to the manufacturing variation. In the previous research, however, this effect has not been investigated at all since it has been supposed that all nodes have the same power. In this paper, we develop a more exact power model for sensor nodes, which we name the threshold-voltage variation model, considering threshold-voltage variation in a manufacturing process. A microprocessor and RF part are considered as hardware blocks in the model, which is then implemented to QualNet in order to evaluate the impact on the life time. The simulation results show that the conventional model overestimates the life time longer than our model.
Keyword Wireless sensor network,Threshold-voltage variation,Power mode |
キーワード |
(和) |
ワイヤレスセンサネットワーク / 閾値電圧ばらつき / 消費電力モデル / / / / / |
(英) |
Wireless sensor network / Threshold-voltage variation / Power model / / / / / |
文献情報 |
信学技報, vol. 106, no. 14, NS2006-6, pp. 21-24, 2006年4月. |
資料番号 |
NS2006-6 |
発行日 |
2006-04-13 (NS) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
NS2006-6 |