講演抄録/キーワード |
講演名 |
2006-01-20 16:15
高電力下における抵抗皮膜を用いたλ/4型電波吸収体の温度分布に関する解析および実験的検討 渡邊慎也・斉藤耕太・○谷口晶俊・橋本 修(青学大)・斉藤寿文(TDK) エレソ技報アーカイブへのリンク:ED2005-222 MW2005-176 |
抄録 |
(和) |
本研究では、FDTD法、Semi-Implicit Method for Pressure Linked Equations(SIMPLE)法、Monte Carlo法およびRadiative Energy Absorption Distribution (READ)法をそれぞれ連成することで、電磁界と全ての伝熱現象(熱伝導、熱伝達、熱放射)を考慮可能な電磁界伝熱連成解析手法(以下、FDTD-SIMPLE-MR法と呼ぶ。)を開発した。
そして、高電力下における抵抗皮膜を用いたλ/4型電波吸収体の温度分布について、FDTD-SIMPLE-MR法と従来の熱連成手法を用いて計算を行った。また、高出力RF装置を用いて高電力を制作したλ/4型電波吸収体に照射し、得られた電波吸収体の
温度分布の解析値と実験値を比較検討した。
この結果、FDTD-SIMPLE-MR法による吸収体の温度分布の計算結果は実験値と良好に一致し、電磁界と全ての伝熱現象(熱伝導、熱伝達、熱放射)を考慮可能な連成解析手法である、FDTD-SIMPLE-MR法の有効性を確認することができた。 |
(英) |
In this reserch, first, FDTD, Semi-Implicit Method
for Pressure Linked Equations (SIMPLE), Monte Calro and
Radiative Energy Absorption Distribution (READ) methods are
combined to calculate electromagnetic field and all the heat
transfer phenomena of heat transport, heat transfer by air
convection and heat radiation (It is called FDTD-SIMPLE-MR
method.). The temperature distribution of λ/4 type EM-absorber
using resistive film under high power injection is calculated using
FDTD-SIMPLE-MR method. Next, the high power injection
experiment is examined using the absorber and high power RF
instruments to get the temperature distribution experimentally.
Finally, the calculated and measured temperature distributions of
the absorber are compared and discussed.
As a result, the calculated temperature distribution of the
absorber by FDTD-SIMPLE-MR method agrees well with the
measured one. And the validity of FDTD-SIMPLE-MR method
is confirmed. |
キーワード |
(和) |
FDTD法 / SIMPLE法 / Monte Carlo法 / READ法 / 熱伝導 / 熱伝達 / 熱放射 / 電波吸収体 |
(英) |
FDTD Method / SIMPLE Method / Monte Carlo Method / READ Method / Heat Transport / Heat Transfer / Heat Radiation / EM-Absorber |
文献情報 |
信学技報, vol. 105, no. 525, MW2005-176, pp. 75-80, 2006年1月. |
資料番号 |
MW2005-176 |
発行日 |
2006-01-13 (ED, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:ED2005-222 MW2005-176 |
|