講演抄録/キーワード |
講演名 |
2005-10-27 10:25
ETCレーン間に用いる円筒棒列電波吸収体に関する一検討 ○小澤 健・中村卓哉・松本好太(青学大)・青柳貴洋(東工大)・橋本 修(青学大)・宮本隆志(神戸製鋼所) エレソ技報アーカイブへのリンク:MW2005-88 |
抄録 |
(和) |
本研究では,磁性損失材料を用いた円筒棒吸収体を周期的に配置した,ETCレーン間
に用いるための円筒被覆棒列電波吸収体に着目した.そして,金属棒に被覆する磁性損失材料の被覆厚み,ピッチ間隔を変化させ,このタイプの吸収壁の最適化のための検討を行なった.その結果,各パラメータを変化させることによる反射減衰量およびシールド量の変化を,解析や実験を通して定量的に確認することができた.特に,円筒棒列の被覆厚みが1.5mm,ピッチ間隔が16mmの場合では,反射減衰量が約-9dBおよびシールド量が約-25dBの性能が得られることを確認した. |
(英) |
In this study, we focus on a wave absorber barrier which is formed by
arranging cylindrical wave absorbers composed of magnetic loss material
periodically and is located between ETC lanes. The optimization of this
type of absorber barriers is examined by changing the thickness of magnetic loss material coating on the metallic bars and the pitch
intervals between the bars. As a result, the change of the reflection
loss and the shielding effect along with the change of each parameter is
confirmed quantitatively through the analysis and the experiment.
Especially, it was confirmed that the reflectivity is about -25 dB and
the shielding effect is about -9 dB when the coating thickness is 1.5mm
and the pitch intervals are 16mm. |
キーワード |
(和) |
磁性損失材 / 円筒棒列 / 電波吸収体 / ETC / / / / |
(英) |
matgnetic loss material / cylindrical / wave absorber / ETC / / / / |
文献情報 |
信学技報, vol. 105, no. 368, MW2005-88, pp. 13-17, 2005年10月. |
資料番号 |
MW2005-88 |
発行日 |
2005-10-20 (EMCJ, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:MW2005-88 |
|