講演抄録/キーワード |
講演名 |
2005-09-12 16:15
グレーティングローブ抑制平面アンテナ用折返導波管 ○正木健一・山岡幸一・黒木太司(呉高専)・米山 務(東北工大) エレソ技報アーカイブへのリンク:MW2005-75 |
抄録 |
(和) |
高誘電率LSE-NRDガイド放射器と二層構造折返導波管を用いた60GHz帯ミリ波平面アンテナが試作されたが、これをNRDガイド回路に組み込む際にはサーキュレータ用永久磁石を埋め込むために折返導波管の間の仕切導体板に厚みを設ける必要がある。また、平面アンテナは中空オーバーサイズ導波管で1波長間隔長尺スロットアレイを励振した構造なので、グレーティングローブが発生する。そこで本論では、これらの問題を解決するため、仕切導体板を有限厚とした折返導波管を検討し、かつスロットアレイを励振するオーバーサイズ導波管にテフロンを充填し、アンテナを試作してグレーティングローブの抑制を確かめた。 |
(英) |
A double-layered folded oversized-waveguide, which consists of a 2-dimensional parabolic reflector, fed by a high permittivity LSE-NRD guide radiator in the lower layer, and a radiating slotted array fed by an oversized-wavegude in the upper layer, was designed for a millimeter-wave planar antenna. Main emphasis was placed on suppression of grating robes in the planar antenna, and thus, the radiating slots were spaced by a period of less than a free space wavelength by filling a Teflon material in the oversized-wavegude in the upper layer. Moreover, it was theoretically considered that a metal plate partition with finite thickness between the lower and upper layers was introduced in the folded oversized-waveguide since permanent magnets for circulators had to embed in the metal plate partition. Based on the theoretical consideration, the double-layered folded oversized-waveguide with the metal plate partition with finite thickness was fabricated and tested at 60 GHz. The levels of the grating robes were measured to be less than 20 dB compared with that of the main robe, and hence, successful grating robe suppression. |
キーワード |
(和) |
NRDガイド / 折り返し導波管 / マイクロ波 / ミリ波 / / / / |
(英) |
NRD guide / Folded Waveguides / Microwaves / Millimeter-Waves / / / / |
文献情報 |
信学技報, vol. 105, no. 271, MW2005-75, pp. 73-76, 2005年9月. |
資料番号 |
MW2005-75 |
発行日 |
2005-09-05 (MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:MW2005-75 |