講演抄録/キーワード |
講演名 |
2005-05-19 14:50
最適な基本波負荷を持つ第2高調波出力発振器 ○中根貴史・佐薙 稔・高橋伸悟・亀井 龍・藤森和博・野木茂次(岡山大) エレソ技報アーカイブへのリンク:MW2005-19 |
抄録 |
(和) |
ミリ波のような高い周波数において高出力を得るために第2高調波出力発振器の最適な基本波負荷インピーダンスについて検討した。まず、周波数2逓倍器において、用いたFETの近似された等価回路モデルと作製した逓倍器の特性測定により、第2高調波出力が最大となる基本波負荷リアクタンスを求めた。次に、基本波発振周波数が6GHzである第2高調波出力発振器において、基本波負荷インピーダンスの虚部を同じFETを用いる逓倍器の最適値と等しくすることで、27mWの高調波出力及び26%のドレーン効率を得た。 |
(英) |
In order to obtain high output power in higher frequency range such as millimeter wave, optimum fundamental load impedance for second harmonic oscillator has been investigated. First, fundamental load reactance of frequency doublers for maximum second harmonic output power was obtained by an approximated equivalent model for the used FET and experiments of the fabricated doublers. When the second harmonic oscillator with fundamental oscillation frequency of 6GHz had the fundamental load impedance whose the imaginary part was nearly equal to the value for the frequency doubler with the same FET, second harmonic output power and drain efficiency were obtained as 27mW and 26%, respectively. |
キーワード |
(和) |
マイクロ波 / 周波数逓倍器 / 第2高調波出力発振器 / 逆C級動作 / / / / |
(英) |
microwave / frequency multiplier / second harmonic oscillator / inverse class-C operation / / / / |
文献情報 |
信学技報, vol. 105, no. 60, MW2005-19, pp. 43-48, 2005年5月. |
資料番号 |
MW2005-19 |
発行日 |
2005-05-12 (MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:MW2005-19 |