講演抄録/キーワード |
講演名 |
2005-01-17 14:55
周波数選択板装荷導波管フィルタの設計及び実験的検討 ○大平昌敬・出口博之・辻 幹男・繁沢 宏(同志社大) エレソ技報アーカイブへのリンク:ED2004-210 MW2004-217 |
抄録 |
(和) |
任意形状共振素子の周波数選択板(FSS)を共振器,1/4波長導波管をインバータとして用いたFSS装荷導波管フィルタの設計及びその実験的検証を行っている.本設計では,各FSSに要求される共振特性を等価回路論的手法によりあらかじめ求めておき,その共振特性と一致するように遺伝的アルゴリズム(GA)を用いてFSS素子設計を行っている.設計したFSS装荷導波管フィルタは,FSSの共振特性を利用することによって付加的な構造を用いることなく複数減衰極を実現している.そして設計したFSSを試作,実験を行い,モーメント法による計算結果との一致から本フィルタの有効性を示している.また,実験での通過域における挿入損の原因を計算結果と実験結果の比較から検討を行い,FSS支持基板である誘電体の損失が主要因であることも示している. |
(英) |
This paper shows design examples and their experimental verification of a waveguide filter consisting of arbitrarily-shaped frequency selective surfaces (FSS) as resonators and quarter-wavelength waveguide sections as inverters. In the present design method, the shape of each FSS is designed by a genetic algorithm (GA) so that the resonant curve of the FSS can be fitted to that obtained from an equivalent-circuit approach. As design examples, we present two waveguide filters with three-layer FSSs having four and six attenuation poles at both sides of the passband, respectively. The effectiveness of the designed filters is proved by good agreement between the calculated and the measured results. Also, we confirm that the insertion loss observed at the passband in the experiments is mainly caused by loss of a dielectric for supporting the FSSs. |
キーワード |
(和) |
導波管フィルタ / 周波数選択板 / 遺伝的アルゴリズム / 任意形状素子 / / / / |
(英) |
waveguide filter / frequency selective surface / genetic algorithm / arbitrarily-shaped element / / / / |
文献情報 |
信学技報, vol. 104, no. 551, MW2004-217, pp. 37-42, 2005年1月. |
資料番号 |
MW2004-217 |
発行日 |
2005-01-10 (ED, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:ED2004-210 MW2004-217 |