講演抄録/キーワード |
講演名 |
2004-08-27 15:40
光ファイバ母材内部屈折率分布測定法 ~ 数値積分における雑音影響の軽減法 ~ ○古田真治・水間幸大(北海道工大)・田中知朗(アドヴァンステクノロジ)・佐々木一正(北海道工大/アドヴァンステクノロジ) |
抄録 |
(和) |
光ファイバの製造は,母材作成,ファイバへの線引きという2段階の工程がとられ,光ファイバの特性は母材の段階で形成されることから,母材の段階での屈折率分布の測定とその情報に基づく品質管理が行われてる.この目的に用いられる測定では偏向関数を測定した後,屈折率分布に数値計算により変換される.そのため,測定技術上の精度の向上のためには物理的測定原理の開発に加えて,数値計算アルゴリズムの開発が必要となる.これまでに各種の測定方法を提案してきたが数値計算アルゴリズムについては従来より使われているAbel変換の方法を踏襲してきた.しかし,この方法ではコア中心部で雑音が強調されるという欠点があり,改善が求められていた.そこで,近軸光線において,偏向関数と屈折率分布はsin-cos変換の関係にあることを利用して,この雑音強調の影響を軽減する方法について検討し,ソフトウエアを開発して実行したところ良好な結果を得たので報告する. |
(英) |
This report describes about development of index-profiling technique for optical fiber preforms, particularly on the noise enhancement effect often appears near core center. The optical fiber manufacturing process usually takes two steps 1) preform fabrication and 2) drawing to fibers. As the index profile required for optical fiber is produced on preform stage and therefore the preform-index-profile measurement is commonly done to evaluate fiber quality in fiber fabrication process. The index profiling process includes both measurement of deflection function and numerical transform of the deflection function to index profile. In order to improve accuracy of the measurement, software algorithms must be developed as well as hardware. The noise enhancement effect near core center is analyzed and a new technique for reducing the noise effect is considered. We have good result obtained by using a test system. |
キーワード |
(和) |
光ファイバ母材 / 屈折率分布測定 / 雑音影響軽減 / / / / / |
(英) |
optical fiber preform / refractive-index profile / numerical transform / / / / / |
文献情報 |
信学技報, vol. 104, no. 262, OFT2004-44, pp. 73-76, 2004年8月. |
資料番号 |
OFT2004-44 |
発行日 |
2004-08-20 (OCS, OFT) |
ISSN |
Print edition: ISSN 0913-5685 |
PDFダウンロード |
|