講演抄録/キーワード |
講演名 |
2018-01-26 09:00
溶液合成法により作製したZnS:Cu分散型EL素子 ○上田祥平・田中聡士・猿田航己・石垣 雅・大観光徳(鳥取大) EID2017-37 エレソ技報アーカイブへのリンク:EID2017-37 |
抄録 |
(和) |
分散型無機EL素子の発光特性を改善すべく、ZnS:Cuナノ粒子の溶液合成におけるCuの高濃度付活、ならびに同ナノ粒子の熱処理による結晶粒界へのCuxSの高密度生成を目指した。1000℃で焼成後、750℃でアニール処理を行うことで比較的強いPLおよびEL輝度を得た。現時点でのEL輝度は低く、駆動周波数1kHz、印加電圧233Vにおいて1.3 cd/m2である。高輝度のEL発光を得るためには、適度に大きな結晶粒子と高い結晶性の両立が不可欠であることが分かった。 |
(英) |
The synthesis of ZnS:Cu nanophosphor and the proper thermal treatment has been investigated to improve luminescent characteristics of dispersive type electroluminescent devices, since both high concentration of Cu activation and high density of CuxS formation are important. It has been found that step thermal treatment, i.e., the firing at 1000℃ and the after-annealing at 750℃ is the proper thermal treatment. A currently obtained EL luminance is still very low and is about 1.3 cd/m2 at 233 V and at 1 kHz. It concludes that both enough large ZnS:Cu particles and high crystallinity are necessary to obtain high EL characteristics. |
キーワード |
(和) |
分散型EL / ナノ蛍光体 / ZnS:Cu / 溶液合成法 / 熱処理 / / / |
(英) |
dispersive type EL / nanophosphor / ZnS:Cu / liquid phase reaction / thermal treatment / / / |
文献情報 |
信学技報, vol. 117, no. 411, EID2017-37, pp. 49-52, 2018年1月. |
資料番号 |
EID2017-37 |
発行日 |
2018-01-18 (EID) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EID2017-37 エレソ技報アーカイブへのリンク:EID2017-37 |