講演抄録/キーワード |
講演名 |
2017-02-17 13:40
薄膜スライド接点における摺動摩耗抑制 ○山本勇樹・梅内芳浩(オムロン)・森井真喜人(オムロンスイッチアンドデバイス) R2016-62 EMD2016-89 エレソ技報アーカイブへのリンク:EMD2016-89 |
抄録 |
(和) |
電気接点における接点損耗は大別すると機械的摩耗と電気的消耗の2つに分けられる。機械的摩耗に関しては、Holm等によって接点硬度と摩耗量の関係が確認されてきた。しかしながら、厚さ数ミクロン以下の薄膜金属を接点として扱う場合には、ビッカース等の従来測定方法では精度の良いデータを得るのが困難であり、バルク材での検討のように接点硬度と摩耗量の相関を得ることが難しかった。本検討では、薄膜金属の硬度をより精度良く測定する手法としてナノインデンテーション法による硬度測定を見出した。その結果、薄膜接点の硬度と摩耗量の相関が測れるようになり、接点硬度によるスライド接点の摩耗抑制が可能となった。 |
(英) |
Contact wear at electrical contacts is roughly classified into mechanical wear and electrical wear. Regarding mechanical wear, the relationship between contact hardness and wear has been confirmed by Holm[1]. However, when the contact thickness becomes thin to several microns or less, it is difficult to measure by the conventional measurement method such as Vickers, and it was difficult to obtain the correlation between the contact hardness and the wear amount as in the bulk material study. Therefore, in this study, we have found the Nano-indentation as a more accurately measurement method for hardness of the thin film metal. As a result, the correlation between the hardness of the thin film contacts and the wear amount was clarified, and the wear of the sliding contact can be controlled by the contact hardness. |
キーワード |
(和) |
スライド接点 / 摺動摩耗 / 硬度 / ナノインデンテーション / / / / |
(英) |
Sliding Contact / Mechanical Wear / Hardness / Nano-Indentation / / / / |
文献情報 |
信学技報, vol. 116, no. 459, EMD2016-89, pp. 15-18, 2017年2月. |
資料番号 |
EMD2016-89 |
発行日 |
2017-02-10 (R, EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
R2016-62 EMD2016-89 エレソ技報アーカイブへのリンク:EMD2016-89 |