講演抄録/キーワード |
講演名 |
2016-03-03 12:30
[特別講演]開放スタブと接地スタブを装荷したリング共振器BPFによる低挿入損失特性の実現 ○林 和幸・和田光司(電通大) MW2015-191 ICD2015-114 エレソ技報アーカイブへのリンク:MW2015-191 ICD2015-114 |
抄録 |
(和) |
バンドパスフィルタ(BPF)の通過帯域内の低挿入損失特性を実現するためには,直流を通し,通過帯域幅が広いフィルタが適している.そのような特性を有するフィルタとして,スタブを2つ装荷したリング共振器BPFが知られている.そこで,リング共振器に対して開放スタブ及び接地スタブを装荷することで,リング部分を構成する伝送線路のストリップ導体幅を変化させることなく,阻止域において複数の減衰極を有する低挿入損失なBPFを実現する.本研究では,先ず,開放スタブ及び接地スタブを装荷したリング共振器BPFを設計し,その動作原理について説明する.次に,設計したBPFの試作実験を行い,その結果,2015年度学生マイクロ波回路設計試作コンテストにおける仕様を満足した上で,通過帯域内において最大値0.17 dBの挿入損失を実現した. |
(英) |
A wide passband filter capable of passing a direct current is suitable in order to realize low insertion loss in the passband of the bandpass filter(BPF).The ring resonator based BPF using stubs is well known for realizing the aforementioned characteristics.By loading open-ended stub and short-ended stub to the ring resonator, a BPF having low insertion loss and attenuation poles in the stop band is realized without changing the strip conductor width of the transmission lines for ring section.In this study, a design of the ring resonator based BPF with an open-ended stub and short-ended stubs is carried out.The operating principle of the proposed filter is also described.The experimental result shows that the insertion loss of the maximum value 0.17 dB in the passband is realized as well as the specifications in the microwave circuit design universiade 2015 are achieved. |
キーワード |
(和) |
低挿入損失 / リング共振器 / バンドパスフィルタ / スタブ / 2015年度学生マイクロ波回路設計試作コンテスト / / / |
(英) |
Low insertion loss / Ring resonator / BPF / Stub / Microwave circuit design universiade 2015 / / / |
文献情報 |
信学技報, vol. 115, no. 476, MW2015-191, pp. 101-106, 2016年3月. |
資料番号 |
MW2015-191 |
発行日 |
2016-02-24 (MW, ICD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2015-191 ICD2015-114 エレソ技報アーカイブへのリンク:MW2015-191 ICD2015-114 |