講演抄録/キーワード |
講演名 |
2014-10-08 15:30
磁性ガーネット/アルミナ多層膜構造による体積磁気ホログラムの回折効率改善 ○小林 完・磯谷亮介・後藤太一・高木宏幸・Lim Pang Boey・中村雄一・井上光輝(豊橋技科大) CPM2014-96 エレソ技報アーカイブへのリンク:CPM2014-96 |
抄録 |
(和) |
我々は,磁性ガーネット膜を用いて磁気ホログラムの記録再生が可能なことを示してきたが,回折効率が低く,その改善が必要である.そのためには磁気フリンジを膜深くまで形成できれば良いが,単に書き込みエネルギーを上げても,膜表面付近で温度が上がりすぎフリンジ形状が乱れ,回折効率改善は難しい.そこで本研究では過剰熱を逃がすためアルミナ膜を入れた多層膜構造について検討した。多層膜を構築するために,内部でどの程度磁化反転領域が広がるかを調査した後,各層の膜厚を決定した.設計した多層膜では,深く明瞭なフリンジが得られ回折効率が改善できることを示した. |
(英) |
The magnetic hologram using magnetic garnet films are expected to high density rewritable media, while its diffraction efficiency is insufficient. The increase in writing energy may be effective to improve the diffraction efficiency. However the diffraction efficiency was not improved by experiment because the fringe shape was disturbed by thermal diffusion at high energy. In this work, alumina layers were inserted in garnet as heat sink to suppress the effect of thermal diffusion. The multilayer structure was designed, and the validity of this structure was investigated by numerical simulation. A clear and deep magnetic fringe could be achieved in the multilayer structure, and high diffraction efficiency was obtained. |
キーワード |
(和) |
磁気ホログラム / 熱磁気記録 / 磁性ガーネット / 熱拡散 / 多層膜 / / / |
(英) |
Magnetic hologram / Thermomagnetic recording / Magnetic garnet / Thermal diffusion / Multilayered structure / / / |
文献情報 |
信学技報, vol. 114, no. 237, CPM2014-96, pp. 21-24, 2014年10月. |
資料番号 |
CPM2014-96 |
発行日 |
2014-10-01 (CPM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
CPM2014-96 エレソ技報アーカイブへのリンク:CPM2014-96 |