講演抄録/キーワード |
講演名 |
2014-03-17 15:20
歩行補助ロボットの歩行速度の向上のための軌道計画法 ○石川寛典・加藤高之・ChangHyun Sung・香川高弘・宇野洋二(名大) MBE2013-127 |
抄録 |
(和) |
本研究は,歩行補助ロボットによる歩行動作の速度向上手法を提案する.従来の歩行動作は,作業空間上で軌道を生成するため,関節の可動域やモータの速度限界を考慮できない.このため歩行速度は最大で0.65 [km/h]程度であった.本研究ではこの問題を解決するために,関節角空間上での軌道生成を行う.歩行パラメータの決定には倒立振子モデルを導入し,歩行中の後方転倒を防止する.またオンラインで最適化を行い,躓きやモータの速度限界を超過しない動作を生成する.提案法は1.31 [km/h]の歩行動作を生成することができ,従来法の2倍の速度向上を達成した.最後に歩行補助ロボットWPALを用いた実験により,提案法の有効性を確かめた. |
(英) |
In this paper, we propose a motion planning method for faster walking with a wearable robot.Conventional method generates trajectories of walking in a workspace coordinates which can not deal with a range of joint motion and a limit of angular velocity.In order to improve the walking velocity, our method generates the trajectories in the joint-space.Some parameters of the motion planning are specified by an inverted pendulum model to avoid falling backward.Moreover, in order to prevent stumbling or excessing the maximum angular velocity, the other parameters of the trajectory are determined by an optimization process.Using the proposed method, a subject could walk at a velocity of 1.31 [km/h] which is twice as fast as the walking by the conventional method.Finally, the proposed method is validated by measurement experiments of walking using a wearable robot WPAL. |
キーワード |
(和) |
歩行補助ロボット / 歩行速度 / 倒立振子 / 最適化 / / / / |
(英) |
Wearable robot / Walking speed / Inverted pendulum / Optimization / / / / |
文献情報 |
信学技報, vol. 113, no. 499, MBE2013-127, pp. 63-68, 2014年3月. |
資料番号 |
MBE2013-127 |
発行日 |
2014-03-10 (MBE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MBE2013-127 |