講演抄録/キーワード |
講演名 |
2014-02-21 14:35
熱音響システムにおける共鳴モード決定要因 ~ 仕事流の向きに関する検討 ~ ○井上 学(同志社大)・坂本眞一(滋賀県立大)・多賀一瑳・渡辺好章(同志社大) US2013-107 |
抄録 |
(和) |
ループ管方式熱音響システムにPhase Adjuster (PA)を挿入することによりエネルギー変換効率を向上させることが可能である.しかしながら,現在までこの効率向上要因については充分に説明されていない.更なる効率向上のため,この要因の理解が必要である.本文では,まずPA設置による共鳴モード制御とエネルギー変換効率向上効果について述べる.次に,PAによる共鳴モード制御原理に関する実験について述べる.本実験については,ラウドスピーカにより音波を強制駆動し,PAの設置位置が形成される音場に与える影響を確認,検討を行った.結果,PAの設置位置により音響エネルギー流方向が決定することが確認された.自励発振によるエネルギー流方向とPAの設置位置により決定する音響エネルギー流方向が一致するように共鳴モードが決定すると考える. |
(英) |
The Phase Adjuster, which is a device of changing the inner diameter of system locally, improves the efficiency largely. However, the efficiency improvement factors are not fully explained now. Therefore, it is necessary to understand those factors for more efficiency improvement. In this paper, the control of the resonance mode and the improvement of acoustic power by setting a PA are first explained. Then, experiments on the deliberation of factors enabling resonance mode control by setting a PA in a thermoacoustic system are described. These experiments are carried out by forced oscillation using a loudspeaker. Results show that the PA position determines the work flow direction. Therefore, it is considered that the resonance mode controlled in the work flow direction determined by the PA position is the same as what observed in work flow direction in a loop-tube type thermoacoustic system. |
キーワード |
(和) |
ループ管方式熱音響システム / 共鳴モード / Phase Adjuster / / / / / |
(英) |
Loop-tube type thermoacoustic system / Resonance mode / Phase Adjuster / / / / / |
文献情報 |
信学技報, vol. 113, no. 439, US2013-107, pp. 69-73, 2014年2月. |
資料番号 |
US2013-107 |
発行日 |
2014-02-14 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2013-107 |