講演抄録/キーワード |
講演名 |
2007-11-29 14:00
熱音響冷却システムの実用化に関する検討 ~ ループ管方式の低温度差駆動に向けた薄膜の利用について ~ ○西川昌宏・坂本眞一・堀田浩平・渡辺好章(同志社大) US2007-77 |
抄録 |
(和) |
本報告では,熱音響冷却システムであるループ管の低温度差駆動を目的とし,管内に薄膜を挿入した.まず入力熱エネルギー一定の条件下で,薄膜の挿入位置がプライムムーバにおいて熱交換を行うスタックの上端と下端の温度差に与える影響に注目した.薄膜の挿入位置をプライムムーバに接近させることで,スタックにおける音圧と粒子速度の位相差の調節および粘性抵抗の減少が引き起こされ,熱から音へのエネルギー変換効率が向上し,低温度差での駆動が確認できた.次に薄膜の挿入位置は変化させず,入力熱エネルギーを低下させることで低温度差駆動を行った.温度差が低下することでスタック流路内の粘性境界層が薄くなり,スタックが管内の音場に与える境界条件のとしての働きが弱くなり位相差分布がシフトした.2つの測定により,薄膜が管内の音場に与える影響を検証し,薄膜を利用したループ管の低温度差駆動に成功した. |
(英) |
In this report, we inserted membrane into loop-tube type thermoacoustic cooling system for the purpose of driving by low temperature. At first, we focused on variation of temperature difference between top and bottom of a stack that position of membrane caused under certain input heat energy. Close distance between membrane and the stack meant high energy conversion efficiency from heat to sound and enabled to drive loop-tube by low temperature difference. The reasons were adjustment of phase difference between pressure and particle velocity at prime mover and decrease of viscous resistance in a stack channel. Next, we focused on lowering input heat energy with membrane at the certain position. It caused shift of phase difference distribution. One of the reasons was that stack’s effect as boundary condition became weak by temperature decrease of top of stack and it made viscous boundary layer thinner. |
キーワード |
(和) |
熱音響現象 / ループ管 / 廃熱 / 薄膜 / PU位相差 / 音響インテンシティ / 粘性境界層 / |
(英) |
Thermoacoustics / Loop-tube / Waste heat / Membrane / Phase difference between P and U / Sound Intensity / Viscous boundary layer / |
文献情報 |
信学技報, vol. 107, no. 357, US2007-77, pp. 13-18, 2007年11月. |
資料番号 |
US2007-77 |
発行日 |
2007-11-22 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2007-77 |