講演抄録/キーワード |
講演名 |
2007-08-23 17:40
テラヘルツ伝送用フレキシブル中空光ファイバ 松浦祐司・○竹田枝里子(東北大) OFT2007-21 |
抄録 |
(和) |
テラヘルツ波伝送用金属中空ファイバ,誘電体内装金属中空ファイバの設計と製作したファイバの評価結果が示されている.内径1 mmの銀中空ファイバは波長200 μmにおける伝送損失が7.5~8 dB/mであり,これは支配的な伝送モードとして予想されたTE11モードの伝送損失理論値とほぼ一致していた.片面に銀層を形成したポリエチレンフィルムを螺旋状に巻き,ポリカーボネートチューブに挿入するという手法で内径3 mmの誘電体内装銀中空ファイバを製作し,評価を行ったところ,波長200 μmにおいて約1.3 dB,曲げによる付加損失は約1 dBとなった。内径3 mmと大口径であるが、曲げ半径は10 cmであり、フレキシブルかつ低損失なテラヘルツ波伝送路を実現した. |
(英) |
Hollow optical fibers for terahertz wave delivery are designed and fabricated. Fibers with silver inner coating work as metal hollow waveguides and experimental results show that transmission losses are 7.5-8.0 dB/m at 200-um wavelength for 1-mm diameter fibers. This measured losses coincide well with theoretical losses of TE11 mode that was expected as a dominant mode in metal hollow fibers. A dielectric-loaded, metal hollow waveguides are fabricated by inserting a polyethylene film with silver coating into a plastic tubing. Measured losses of the dielectric-loaded fiber at 200 um are 1.3 dB for 3.0-mm-bore hollow optical fibers. Bending losses are also low in dielectric loaded fibers and additional losses due to bending are around 1 dB. Although the fibers have relative large diameter of 3 mm, they are flexible and the minimum bending radius is around 10 cm. |
キーワード |
(和) |
テラヘルツ波 / 中空ファイバ / / / / / / |
(英) |
Terahertz wave / Hollow fibers / / / / / / |
文献情報 |
信学技報, vol. 107, no. 191, OFT2007-21, pp. 39-43, 2007年8月. |
資料番号 |
OFT2007-21 |
発行日 |
2007-08-16 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2007-21 |