講演抄録/キーワード |
講演名 |
2005-10-28 13:20
側面付きの地板を持つプリント基板からの電磁波放射 ○戸花照雄・笹森崇行・阿部紘士(秋田県立大) エレソ技報アーカイブへのリンク:MW2005-105 |
抄録 |
(和) |
有限な大きさのプリント回路基板からの放射電磁波は,基板上を流れる
コモンモード(ダイポールモード)電流が発生することにより深刻になり,
特に地板の幅が小さいときに大きな放射が起こることが知られている.
この放射電磁波を抑制するために
プリント基板の地板の端を折曲げる方法を本報告において提案した.
また,折曲げる部分の大きさと放射抑制効果との関係につい検討した.
解析方法として
Finite Different Time Domain法を用いた.
解析結果より,
折曲げる地板部分の幅が大きいときに大きな放射抑制効果が得られた.
線路が基板の端にある場合には,両端を折曲げる必要はなく
線路に近い端を折曲げるだけで十分な放射抑制効果が得られた.
また,最大放射電界の測定結果が解析結果と同様の
傾向を示すことにより解析結果の妥当性が示され,
提案した方法により不要電磁波放射を効果的に抑制できることが示された. |
(英) |
In order to suppress the emission from a printed circuit board
with a finite ground plane and a microstrip line,
the authors proposed the method bending edges of the ground plate on the PCB.
The suppression effect using the bending edges
was showed by numerical results using FDTD method.
From numerical results,
it was showed that as increases the area of bending edges,
the suppression effect of that increases.
Though the suppression effect of the case bent both edges
is larger than the that of the case bent single edge in the PCB with
the microstrip line centered, the suppression effect of both cases in the PCB
with the microstrip line nearby edge have about same.
To validate numerical results,
the suppression effect is derived from measurement of
a max electric field intensity of PCB with bending edges. |
キーワード |
(和) |
プリント基板 / 有限な大きさの地板 / FDTD法 / コモンモード電流 / 放射抑制 / / / |
(英) |
PCB / finite ground / FDTD / common-mode / suppression / / / |
文献情報 |
信学技報, vol. 105, no. 367, EMCJ2005-99, pp. 37-41, 2005年10月. |
資料番号 |
EMCJ2005-99 |
発行日 |
2005-10-21 (EMCJ, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:MW2005-105 |