詳細表示

No 98087
標題(和) ATMクロスコネクト装置におけるマルチキャスト方式
標題(英) Multicast Method for ATM Cross-Connect System
研究会名(和) 通信方式; 光通信システム
研究会名(英) Communication Systems ; Optical Communication Systems
開催年月日 1998-06-25
終了年月日 1998-06-26
会議種別コード 2
共催団体名(和)
資料番号 CAS98-40 // CS98-12
抄録(和) ATMバックボ-ンネットワ-クを構成するATMクロスコネクト装置では,マルチキャストサ-ビスの実現方法として,分岐盤方式が検討されている.本方式では,分岐盤にてコピ-された多数のマルチキャストトラヒックがスイッチの同一出力ポ-トへ向かうとき,スイッチバッファのセル損失, セル遅延特性が悪化する.本稿では,この問題を解決しつつ,マルチキャストトラヒックの効率的な転送を行なうために,出力ポ-トごとのマルチキャスト収容率に応じてシェ-ピングレ-トを若干増やしセルの出力間隔を空ける高速シェ-ピング方法を提案する.また,提案方式の有効性を確認すると共にスイッチ及び分岐盤それぞれの必要バッファ量に着目した最大収容時の高速化係数(高速化のパラメ-タ)の最適値を求め,その遅延特性について評価する.
抄録(英) The use of add-on multicast handling circuit packs which replicate the input traffic is now under study for providing multicast (point-to-multipoint) service. It allows the feature enhancement of the multicast functionality without modification of the equipment (e. g., ATM cross-connect system). When copied traffic concentrate on the same output port of the switch element, cell loss, cell delay performance deteriorates. This paper proposes "high-speed shaping method", which operates the shaper read-out process at a higher bit rate than the input bit rate. This method avoids performance degradation and accommodates multicast traffic effectively. Then, the effect of the proposed method is evaluated in terms of the possible number of copied traffic from one source traffic. In addition, it shows the optimum acceleration factor (ratio between the read-out bit rate and the input bit rate) of the shaper in terms of the total buffer requirement of the switch elemet and the shaper. Finally, delay performanece is evaluated.
収録資料名(和) 電子情報通信学会技術研究報告
収録資料の巻号 Vol.98 No.147,148
ページ開始 19
ページ終了 24
キーワード(和) バ-ストトラヒック
キーワード(英) burst traffic
本文の言語 JPN
著者(和) 太田宏
著者(ヨミ) オオタヒロシ
著者(英) Ohta Hiroshi
所属機関(和) NTT
所属機関(英)
著者(和) 松永治彦
著者(ヨミ) マツナガハルヒコ
著者(英) Matsunaga Haruhiko
所属機関(和) NTT
所属機関(英)
著者(和) 渡部浩治
著者(ヨミ) ワタナベコウジ
著者(英) Watanabe Koji
所属機関(和) NTT
所属機関(英)
著者(和) 坪井利憲
著者(ヨミ) ツボイトシノリ
著者(英) Tsuboi Toshinori
所属機関(和) NTT
所属機関(英)

WWW サーバ管理者
E-mail: webmaster@ieice.org